Key things to know about the PRO L and XL:

Large volume builds up to 144 liters

Intelligent no-power detection for avoiding print failure

Industrial quality 3D prints for prototyping and design

Faster operations and ease of use with 7” touch screen

Large build sizes with unmatched ease of use

Benefit from the advantages of additive manufacturing, without the hassle. The Pro L & XL offer unmatched
ease of use for professional large volume 3D printing.
 

Pro L building size: 300 x 400 x 400 mm or 11.8” x 15.75” x 15.75”
 

Pro XL building size: 600 x 400 x 600 mm or 23.62″ x 15.75″ x 23.62″

These bigger machines can fit seamlessly into any workshop, lab or factory environment
because they can fit through a standard doorway, to make the logistics of installation quick and simple too

Preventing print failure at all times

During printing the flow of the print material is fully controlled to avoid missing print layers or printing in thin air.

Also, when the dual extruders are printing together they are at different print levels. When one is idle, it’s automatically rotated out of the way so that there is no interference with the printed part.

Moreover, if a power outage is detected the printer will pause in a safe position and issue a warning. Once the issue is resolved the 3D printer will resume printing. This saves time and material, and minimizes waste.


Visual (remote) control

   With the Touchscreen, the printer can be accessed via USB and/or WiFi and the unit can be connected in a network or standalone. In a network the unit can control up to 7 stations. This enables you to take full control of your 3D printer, and increase efficiency in your workflow.

Always upgradeable in the future

The design of the FELIX Pro L & XL allows for the installation of future hardware upgrades with no fuss. Which means that you benefit from any new future developments. The ‘write off’ time of the FELIX Pro 3D printer is therefore impressively low and makes it a very cost-effective investment.

The release cycles for upgrades are approximately one per year. FELIX strives to achieve the best possible performance in the most cost-effective way.

Build size (LxWxH)
Pro L: 300 x 400 x 400 mm or 11.8” x 15.75” x 15.75”
Pro XL: 600 x 400 x 600 mm or 23.62" x 15.75" x 23.62"

Build volume: 
Pro L: 48 Liter / 12.7 Gallon
Pro XL: 144 Liter / 42 Gallon

Filament (open source):
1.75 mm (tolerance +/- 0.05 mm)

Filament Materials: 
PLA, ABS, PETG, PVA, FLEX, Nylon, Glass, Wood, ect.

Nozzle diameters 
Brass (standard): 0.35 / 0.50 / 0.70 / 0.90 mm
Hardened Steel (optional): 0.35 / 0.50 / 0.70 / 0.90 mm

Print Speed (mm / sec): 
Up to 100 mm/sec (60 mm/sec is recommended) 

Positioning accuracy XYZ: 
0.01 mm

Layer thickness in mm: 
0.05 mm to 0.35 mm or 50 micron to 350 micron 

Nozzle temperature: 
Up to 275 degrees Celsius

Heated bed construction: 
Solid casted & milled high precision aluminum
Up to 110 degrees at environmental temperature > 20 degrees C

Physical dimensions (LxWxH): 
Pro L: Overall dimensions: 600 x 666 x 776 mm or 24” x 26” x 31”
Pro XL: Overall dimensions: 906 x 666 x 966 mm or 37” x 26” x 38”

Control panel:
7” Touch screen, with intuitive menu structure, available in
English, German, Dutch, Spanish and others.

Operating system: 
Windows, Mac OS 

Connectivity options: 
WIFI, USB, LAN

Software: 
Simplify3D - All pre-settings have to be downloaded
from www.felixprinters.com/downloads

Electrical:
110/ 220 volts AC, 50/60 Hz Max 1600 Watt.



Total weight [kg]: 
Pro L: approx. 55 kg
Pro XL: approx. 65 kg

Inside the box: 
Pro L or Pro XL £D printer
Tweezers
Set Teflon tubes 
USB cable
USB stick
LAN cable 
Filament spool holders 
Spool of PLA lament
Quick Start Manual

Operating temperature: 
15 to 30 degrees Celsius

Noise level: 
Less than 40 dBA